info@labomiz.com
info@labomiz.com
Portable Dissolved Oxygen Meter MPDOM-1A
Portable Dissolved Oxygen Meter MPDOM-1A is a microprocessor-based, dissolved oxygen meter with 1 or 2 points calibration using the air-saturated water or zero oxygen solution. The system menu allows setting the number of calibration points, resolution, stability criteria, concentration unit, temperature unit, date and time, etc. Its expanded memory stores or recalls up to 500 data sets and data transfer can be done by USB communication interface.
| Dissolved oxygen range | 0.0 - 20.0 mg / L (or ppm) |
| Dissolved oxygen accuracy | ± 0.2 mg / L |
| Resolution | 0.01 mg / L |
| Calibration points | 1 - 2 points |
| Sensor type | Polarographic DO probe |
| Temperature compensation range | 0 to 50 °C, 32 °F to 122 °F, Automatic |
| Barometric pressure correction | 60.0 to 112.5 kPa, 450 to 850 mmHg |
| Salinity correction | 0 to 50 g / L |
| % of saturation of oxygen range | 0.0 to 200.0 % |
| % of saturation of oxygen accuracy | ± 2.0 % F.S. |
| % of saturation of oxygen resolution | 0.1, 1 % |
| System menu | Allows setting of 9 parameters |
| Data hold function | Manual or automatic endpoint detection |
| Power off | Manual or automatic (10, 20, 30 minutes) |
| Reset function | Yes |
| Memory | Stores up to 500 data sets |
| Output | USB communication interface |
| Display | Backlit LCD (130 × 110 mm) |
| Connector | 6 pin mini plug |
| Calibration due | 0 to 31 days |
| Stability connector | Low or high |
| Power | 3 x 1.5 V “AA” batteries |
| Dimension (L x W x H) | 170 × 85 × 30 mm |
| Weight | 300 g |
Equipped with polarographic sensor |
Portable dissolved oxygen meter has applications in water & waste water management industry, environmental monitoring, surface ground water, research & development, education to detect content of dissolved oxygen.
